Feb 12, 2024 Leave a message

Maintenance Work After The High-speed Metal Circular Saw Machine Is Completed Is Crucial

After the high-speed metal circular saw machine is finished working, some necessary maintenance and other operations must be performed. This will help the device to be younger, not only more stable in performance, but also more flexible in use. In particular, it plays a very critical role in the efficiency of the equipment. Therefore, the maintenance work of the high-speed metal circular saw machine after the work is completed is very important!

 

Maintenance work after use of high-speed metal circular saw machine:

1. Before shutting down the equipment, carefully check the continuity and stability of each component and whether there are any abnormalities during sawing.

2. Clean the inside of the mechanism, especially the joints between components, to see if there are any objects stuck. Small iron filings must be cleaned up. The saw blade must be kept clean, and no residue should be left on the saw teeth.

3. Follow the instruction manual to shut down the machine correctly. Do not cut off the power supply directly! Check whether the wiring is normal and place the plug at a high place to avoid water immersion.

4. Carefully observe the operation of the metal circular saw blade, the parallelism of the cutting surface and the noise of the equipment.

5. Check the status of the oil, do not operate without oil, and check the performance of the main components (especially the core parts). PCL, driver, etc. must remain normal.

6. There should be a major cleaning every month to maintain the performance of the high-speed metal circular saw machine. If the machine is not disassembled and cleaned for many years, it will cause irreparable damage to the equipment.

7. When the weather is hot, open the protective cover of the equipment to keep the whole machine ventilated for about 5 minutes. After the equipment is completely inspected, cover all protective covers.

8. The spray cooling system and automatic lubrication system must be inspected and must be kept unobstructed, and water infiltration in the pipes must be avoided.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry