Feb 10, 2024 Leave a message

Some Common Sense About High-speed Steel Circular Sawing

1. When operating circular saw equipment, pay attention to protecting yourself;

2. Please operate it strictly in accordance with the usage specifications and do not use it beyond the scope to avoid danger;

3. Do not modify the equipment without authorization. If necessary, please contact the manufacturer for improvement;

4. Before using the equipment, check whether the voltage and wiring are normal;

5. Make sure the safety cover of the circular saw blade is in place before each use of the equipment;

6. The saw blade must be installed correctly, otherwise the service life of the saw blade will be shortened, and in serious cases it will break during sawing;

7. Before sawing, be sure to check whether the object being cut is clamped firmly to ensure reliable sawing;

8. After the saw blade is worn, it should be stopped immediately and can be used again after grinding and repair;

9. When operating equipment, you must dress in accordance with relevant requirements. Loose clothes are not allowed and long hair is not allowed to avoid accidents;

10. Operators must be trained and qualified before taking up their posts. Do not allow irrelevant personnel to operate the equipment;

11. When the equipment fails, press the emergency stop switch. After the equipment stops completely, unplug the plug before repair work can be carried out;

12. When installing wiring, you must comply with the regulations of the equipment.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry